Taking Care of All Your Sanitary Needs!

Chemspec Kill Odor Plus

More Views

Chemspec Kill Odor Plus - Gal

Be the first to review this product

Availability: In stock

$28.82
OR

Quick Overview

Chemspec Kill Odor Plus - Gal

Details

Kill Odor Plus is a unique product for the carpet cleaning industry. Three distinct products in one, Kill Odor Plus is a combination of aggressive emulsifiers and surfactants combined with a proprietary odor counteractant specific to modifying the odors associated with urine. KOP is the best choice as a traffic lane pre-conditioner, general purpose spotter and urine odor neutralizer. KOP is also an excellent choice for hard surface restroom clean-up.



Directions for use on carpet:
Always test fabric for colorfastness before applying Kill Odor Plus or any other product. Apply a small amount of cleaner to a clean, white cloth and gently blot test area. If no color transfers to cloth or no change in original fabric occurs, continue with directions below.

Spot Removal
Blot and agitate the spotting solution. Allow 5 minutes dwell time then extract or rinse with water.
Heavily Soiled Traffic Lanes

Pre-spray area to be cleaned at a rate of 200 to 400 sq. ft. per gallon, agitate Kill Odor Plus thoroughly into the carpet’s pile, allow 10 minutes of dwell time then extract with an extractor using hot water and DFC 105 in the machine.

Hot Water Extraction Process
Pre-spray area to be cleaned at a rate of 1000 sq. ft. per gallon, agitate Kill Odor Plus thoroughly into the carpet’s pile, allow 10 minutes of dwell time then extract with an extractor using hot water and DFC 105 in the machine.

Drying
Use air movers to speed dry the carpet. Make sure the carpet is dry before traffic is allowed on it to prevent rapid re-soiling.


Directions for use in restrooms:
Restoration: mop tile and grout liberally especially around urinals and toilets, allow 10 minutes dwell time then scrub the floor paying particular attention to the areas under and around the urinals and toilets, rinse the floor using a clean damp mop and fresh cold water. Allow the floor to dry before putting the restroom back into service. (More dwell time will be beneficial when strong odors are present, using hot water will intensify the odor problem.)

Daily maintenance: mop tile and grout liberally especially around urinals and toilets, allow 10 minutes dwell time then using a clean damp mop and fresh cold water rinse the floor. Allow the floor to dry before putting the restroom back into service.

Additional Information

SKU CHE KOP1G

Review

You're reviewing: Chemspec Kill Odor Plus - Gal

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Compare Products

You have no items to compare.

Latest Review

There are no products matching the selection.

Contact Information

Tel: (562) 986-5225

Fax: (562) 986-5227

Email: z_ramjan@sani-tec.com

Store Location

          Sani-Tec USA

 4021 E. ANAHEIM STREET

 LONG BEACH, CA 90804

 

Sani-Tec

Payment Methold:                                                                                                                                       FOLLOW US ON:  Vimeo Feed